How to connect Jisr Clocking Device to the internet

This step comes before starting to connect the device to Jisr system.

There are two methods of connecting the device to the network:

A) Through Wifi (Wireless)

1. Open the device Menu

2. Select Wi-Fi

3. Enable the Wi-Fi option on the device

To enable Wi-Fi, switch the Wi-Fi option from OFF to ON located at the top of the screen

4. Select your Wireless network from the list.

5. Tap on CONNECT located on the bottom right side of the screen to complete the process.

6. Once connected, the status will be displayed below the name of the Wireless network.

B) Connect via Ethernet/Network Cable

** When using this connection method make sure the WIFI is turned off**

1. Open the Device Menu

2. Select Ethernet

3. The Device has been pre-configured to use DHCP.

This will automatically assign an available IP Address on your network

If you choose to configure the device to use a Static IP, you will need to change the setting from DHCP to Static.

Once you have specified Static, you will be able to input your Static IP Address, Default Gateway, and Subnet Mask

4. Select SAVE to complete to process.

After connecting the device to the Internet properly, you can now connect it to Jisr system.